Motorola C51 Series - Manuel (Page 20)

SD7505 User Guide
10
Step 3: Pair Your Mobile Device to Your SD7505
You must pair your SD7505 and mobile device before you can make your first Bluetooth
connection. “Pairing” creates a trusted link between devices equipped with Bluetooth
wireless technology, and allows your mobile device to remember your SD7505’s ID.
After your SD7505 and mobile device are paired, they can connect to each other whenever
they are in range.
1.
Power up your mobile device.
2. Press and hold the Bluetooth Button on the SD7505 until the Bluetooth LED turns a
solid blue (approximately 4 seconds). The SD7505 is in “pairing mode” while the
Bluetooth LED is a solid blue. Your SD7505 will remain in “pairing mode” for 60
seconds or until pairing is successful.
3. Enable the Bluetooth feature on your mobile device, and set it to look for available
devices. After your mobile device detects the SD7505, you may be prompted to enter
a password (or PIN) to “pair” or “bond” with the SD7505; enter 0000. Pairing is
complete when the SD7505 Bluetooth LED rapidly flashes 10 times. If your SD7505
times out before pairing is successful (the Bluetooth LED goes off), repeat steps 2
and 3.
After a successful pairing, your mobile device and SD7505 automatically establish a
Bluetooth connection. The Bluetooth LED will blink once every 3 seconds as long as that
connection is in place.