Hobart Welding Products OM-477 - Manuel (Page 32)

OM-477 Page 28
7-6. Changing Fuel Filter
Ref. ST-191 898 / Ref. ST-159 727-C
Y Stop engine and let cool.
1 Fuel Shutoff Valve
2 Fuel Line
3 Fuel Filter
To replace filter, close valve and re-
move clamps and filter. Install new
filter and clamps. Inspect line and
replace if cracked or worn. Wipe up
any spilled fuel. Open valve.
Start engine and check for leaks.
Y Stop engine, tighten connec-
tions as necessary, and wipe
up spilled fuel.
Close door.
Tools Needed:
1
3
2
2
7-7. Inspecting And Cleaning Optional Spark Arrestor Muffler
ST-800 722 / Ref. ST-191 898
Y Stop engine and let cool.
1 Spark Arrestor Muffler
2 Cleanout Plug
Remove plug and remove any dirt
covering cleanout hole.
3 Exhaust Pipe
Start engine and run at idle speed to
blow out cleanout hole. If nothing
blows out of hole, briefly cover end
of exhaust pipe with fireproof
material.
Y Stop engine and let cool.
Reinstall cleanout plug.
Tools Needed:
3
2
1
3/8 in