Forza 30 Inch Double Dual Convection Electric Wall Oven User and Care Guide - Manuel (Page 16)

16
11 - System Setting
With the oven on, select the icon and confirm with the
[FUNCTION] knob to enter the SETTINGS menu. This menu
permits setting a number of parameters or special functions. It
also permits accessing the error events list.
1. Press the [FUNCTION] knob to select the sub menu and
confirm by means of pressing the [FUNCTION] knob.
2. Use this menu to change the following settings:
Press the [FUNCTION] knob to select the item to be set or
to be displayed from among the three available ones and
confirm by means of pressing the [FUNCTION] knob.
Event Log
The menu permits checking any recorded errors. These codes
can be notified to the after-sales service.
Demo
The purpose of this function is to set the DEMO mode, which
makes the oven useless forcookingbutautomatically performs
a demonstration of functions.
1. Press the [FUNCTION] knob to select the item ON.
2. Confirm by means of pressing the [FUNCTION] knob.
3. Press the [ON/OFF] knob.
After about 30 seconds, the oven starts to operate in this mode.
To temporarily stop the DEMO function, simply keep any knob
pressed for a few second suntil the oven switches to standby.
If the DEMO function is not disabled, it restarts automatically
after 30 seconds.
To disable the function, enter the DEMO display page and set
OFF. Confirm by means of pressing the [FUNCTION] knob.
NOTE Once set, the function remains enabled even if the oven
is disconnected from the power mains.