Fulgor Milano 700 Series 30 Inch Single Electric Wall Oven Owners Manual - Manuel (Page 14)

EN
10
7 - General Oven Information
Before using your oven for the first time remove all packing and
foreign materials from the oven(s). Any material of this sort left
inside may melt or burn when the appliance is used.
Error codes
This code appears in the event of the electronic control
indicating a fault. When the error appears, the current function
is blocked. If the type of error is related to a safety function,
the oven becomes unusable and every time a start attempt is
made, the same error appears (in which case call in the after-
sales service), while if the error relates to a minor fault, after
being restarted the oven can be used for the functions that do
not involve the faulty part (e.g., a heating element).
These codes are displayed when the electronic control detects
a problem in the oven or in the electronics.
The error code is recorded in the Error Log in the Setup menu.
This error can be communicated to the service technician so
he/she can understand the possible cause of the problem in
advance.
Beeps
Confirms that the command has been received after a key has
been pressed.
It also indicates that a time function has been completed (e.g.
Timer or Timed Cooking). During the execution of a recipe,
an acoustic signal warns the user that the oven is waiting for
operation by the user (e.g., insert the dish or turn it over).
Beeps also signal an oven fault.
Door Lock
It’s displayed steadily when the door is locked. The symbol
flashes when the latch is moving in order to lock
or unlock the door. Do not attempt to open the door at this time.
Door can be opened when the symbol no longer appears. A
padlock appears when the door has been locked automatically
due to self-clean mode or when the door has been locked
manually by the user, for example to prevent children from
having free access to the oven cavity.
Hold the LOCK DOOR key for 3 seconds, the latch will lock the
door. Repeat the same operation to
unlock.
Locking the keyboard
Hold the LOCK KEYS key for 3 seconds. Commands are now
locked and a “Key icon” will be displayed.
Repeat the same operation for 3 seconds to unlock the
keyboard.
NOTE: The power off operation is always available.
Power Failure
After the power returns to the oven, the door lock mechanism
perform a test run then the clock time and date are displayed .
Default Settings
The cooking modes automatically select a suitable temperature
when the cooking mode is selected, these can be changed
when a different one is needed.
It’s also possible to set a user option in order to save the last
used temperature per every cooking mode.
Preheat and Fast Preheat
Whenever a cooking mode is set and the oven is heating,
the preheating starts, during this period, the instantaneous
temperature is displayed together with the thermometer icon.
As soon as the 100% is reached, the control sounds an “end of
preheat” tone and the current temperature value disappears.
When it’s necessary to heat up the oven rapidly, a Fast
Preheat mode is available: it uses the heating elements and the
convection fan in a special way, in order to reduce the heating
time as long as possible.
After having set one of the cooking functions for which the
fast preheat is available and set the desired temperature value
touch the FAST PREHEAT key, the symbol is shown then press
START wait for a few seconds waiting that it starts automatically.
As soon as the set-point temperature is reached, the control
sounds a and both “Fast Preheat Icon” and “current
temperature” disappear. The oven switches automatically to
the desired cooking mode that was previously set: put the food
inside now.