Forno Lazio 30 Inch Freestanding Dual Fuel Range User Manual - Manuel (Page 14)

12
Step 4: Check the handle to make sure it is installed correctly and tightly as illustration.
WARNING:
The installation should be finished step by step. DO NOT remove the washer on the screws at the outside of oven door.
Electrical indication
Your range must be electrically grounded in accordance with local codes or, in the absence of local codes, in accordance
with the National Electrical Code (ANSI/NFPA 70, latest edition). In Canada, electrical grounding must be in accordance with
the current CSA C22.1 Canadian Electrical Code Part 1 and/or local codes.
The power supply must be the correct polarity. Reverse polarity will result in continuous sparking of the electrodes, even
after flame ignition. If there is any doubt as to whether the power supply has the correct polarity or grounded, have it
checked by a qualified electrician.
ELECTRICAL REQUIREMENTS
Electrical Supply Grounded, 240V AC, 60 Hz
Service 15 amp or 20 amp dedicated circuit
Receptacle 4-prong grounding-type
WARNING
Electrical grounding Instructions:
For the selling in the USA market, this range is NOT equipped with a 4-prong (grounding) plug. You must buy the plug
according to the electrical requirement and ask the professional technician to arrange the installation.
Assemble the lower screws first