20 specifications, English – Denon AVR-484 Manuel d'utilisation
Page 50
50
ENGLISH
20 SPECIFICATIONS
2
Audio section
•
Power amplifier
Rated output:
Front:
75 W + 75 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W + 110 W
(6
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Center:
75 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W
(6
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Surround:
75 W + 75 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W + 110 W
(6
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Output terminals:
Front:
A or B
1
6 to 16
Ω
/ohms
A + B
12 to 16
Ω
/ohms
Center/Surround:
1
6 to 16
Ω
/ohms
•
Analog
Input sensitivity / input impedance:
200 mV / 47 k
Ω
/kohms
Frequency response:
10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT ON)
S/N ratio:
98 dB (IHF-A weighted) (TONE DEFEAT ON)
2
Video section
•
Standard video jacks
Input / output level and impedance:
1 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz — +1, –3 dB
•
S-video jacks
Input / output level and impedance:
Y signal — 1 Vp-p, 75
Ω
/ohms
C signal — 0.286 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz — +1, –3 dB
2
Tuner section
[FM] (note: µV at 75
Ω
/ohms, 0 dBf = 1 x 10 –
15
W)
[AM]
Receiving range:
87.50 MHz ~ 107.90 MHz
520 kHz ~ 1710 kHz
Usable sensitivity:
1.0 µV (11.2 dBf)
18 µV
50 dB quieting sensitivity:
MONO
1.6 µV (15.3 dBf)
STEREO
23 µV (38.5 dBf)
S/N ratio:
MONO
80 dB (IHF-A weighted)
STEREO
75 dB (IHF-A weighted)
Total harmonic distortion:
MONO
0.15% (1kHz)
STEREO
0.3% (1kHz)
2
General
Power supply:
AC 120 V, 60 Hz
Power consumption:
3.8 A
Maximum external dimensions:
434 (W) x 147 (H) x 417 (D) mm (17-3/32” x 5-25/32” x 1-23/64”)
Mass:
10.3 kg (22 lbs 11.3 oz)
2
Remote control unit (RC-942)
Batteries:
R6P/AA Type (two batteries)
External dimensions:
55 (W) x 225 (H) x 34.5 (D) mm (2-11/64” x 8-55/64” x 1-9/64”)
Mass:
165 g (Approx. 5.8 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.