Denon AVR-484 - Manuel (Page 35)

35
ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1 Select the input source.
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 20).
(Main unit) (Remote control unit)
w Set the input mode to “AUTO” or DTS.
2 Select the Dolby/DTS Surround mode.
(Remote control unit)
3
Play a program source with the , mark.
• The Dolby Digital indicator lights when
playing Dolby Digital sources.
DIGITAL
Light
2
1 1 3
4, 5, 6, 7, 8
5, 6, 7, 8
5, 6, 7, 8
5, 6, 7, 8
1
1
2
Playback with a digital input
• The DTS indicator lights when playing
DTS sources.
Light
4 Set the surround parameter according to the source.
First, press the SURROUND PARAMETER button.
(Remote control unit)
NOTE:
Please make sure the “AUDIO” position of the slide switch
on the remote control unit.
Press the SURROUND PARAMETER or (down) button to switch to the D. COMP. setting.
Use the (left) and (right) buttons to set the CINEMA EQ.
5
Example: DVD
(Main unit) (Remote control unit)
CINEMA EQ OFF
ON OFF
(left) button (right) button
(Initial)
(Remote control unit)
(Remote control unit)
(Main unit)