Denon AVR-484 - Manuel (Page 40)

40
ENGLISH
1 Turn the SELECT knob to select the surround mode.
(Main unit)
• When turned clockwise
2 Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to “Surround Modes and Parameters” on page 41.
STEREO DOLBY PRO LOGIC II 5CH STEREO MONO MOVIE
JAZZ CLUB ROCK ARENA VIDEO GAME MATRIX VIRTUAL SURROUND
STEREO DOLBY PRO LOGIC II 5CH STEREO MONO MOVIE
JAZZ CLUB ROCK ARENA VIDEO GAME MATRIX VIRTUAL SURROUND
• Operating the surround mode and surround parameters from the main unit‘s panel.
1, 3 2 1
• When turned counterclockwise
To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the SURROUND MODE
button then operate the selector.
(Main unit)
(Main unit)
3 Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MONO MOVIE or
MATRIX surround modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS surround.
Surround parameters e
ROOM SIZE:
This sets the size of the sound field.
There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”. “small” recreates a small sound
field, “large” a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. When the surround mode is set to “VIRTUAL”, the effect level can be set in steps from 1 to 10.
Lower the level if the sound seems distorted.
DELAY TIME:
In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.