Denon AVR-1802/882 - Manuel (Page 33)

33
ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1 Select the input source.
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 21).
8
(Main unit) (Remote control unit)
w Set the input mode to “AUTO” or DTS.
2 Select the Dolby/DTS Surround mode.
SURROUND
MODE
(Remote control unit)
3
Play a program source with the , mark.
B
1 3
1 4 2 2
B
DVD/VDP CD PHONO
TV/DBS VCR-1 VCR-2
SURROUND
MODE
TUNER SHIFT
REMOTE CONTROL UNIT RC-897
STATUS MUTING T.TONE
MASTER
VOL
TITLE
DISC SKIP+
V. AUX
INPUT MODE CDR / TAPE
CHANNEL TV
CD·MD/CDR·DVD/VDP VIDEO SELECT
SYSTEM
SET UP MENU
SELECT
RETURN DISPLAY
SURROUND
CH SELECT
VOLUME
CHANNEL
AVR/AVC DVD/VDP TV VCR
AUDIO
CD MD/CDR
VIDEO
POWER
TAPE · VCR
OFF
ON
3
0
0 2
6 7
9 8
2
3
6 7
8
4
9
5
1
0
6
2
7
3
1
1
4, 5, 6, 7
2
4, 5, 6, 7
Playback with a digital input
When performing this operation from the main unit’s panel,
press SURROUND MODE, then turn SELECT knob and select
“DOLBY/DTS”.
• The following appears on the display. (DOLBY PL II, PRO
LOGIC, DOLBY DIGITAL, DTS SURROUND)
SELECT
(Main unit)
4 Set the surround parameter according to the source.
First, press the SURROUND button.
MENU
SURROUND
NOTE: Please make sure the “AUDIO”
position of the slide switch on the
remote control unit.
(Remote control unit)
EX:
DVD/VDP
3
(Main unit) (Remote control unit)
Use (left) and (right) buttons to
set the CINEMA EQ.
ON OFF
(left) button (right) button
(Remote control unit)
(Initial)
• The Dolby Digital indicator lights when
playing Dolby Digital sources.
DIGITAL
Light
• The DTS indicator lights when playing
DTS sources. Light
CINEMA EQ OFF
The CINEMA EQ mode can be set directly using the main
unit’s CINEMA EQ button.
(Main unit)
• CINEMA EQ mode turns on and off
each times the CINEMA EQ button
is pressed.