Denon AVR-1802/882 - Manuel (Page 17)

17
ENGLISH
10 SETTING UP THE SYSTEM
• Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 9 to 15), make the
various settings described below on the display.
These settings are required to set up the listening room’s AV system centered around the this unit.
STATUS MUTING T.TONE
MASTER
VOL
TITLE
DISC SKIP+ CD·MD/CDR·DVD/VDP VIDEO SELECT
SYSTEM
SET UP MENU
RETURN DISPLAY
SURROUND
9 8
2
3
6 7
SELECT
CH SELECT
SYSTEM SETUP button
Press this to display the system setup on the display.
CURSOR buttons ( • , ª , 0 , 1 )
Press this change what appears on the display.
SELECT button
Press this to switch the display.
Also use this button to complete the setting.
• System setup items and default values (set upon shipment from the factory)
System setup Default settings
Speaker
Configuration
Subwoofer Mode
Channel Level
Digital Input
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE for full-size,
full-range) to automatically set the composition of the signals output
from the speakers and the frequency response.
This adjusts the volume of the signals output from the speakers and
subwoofer for the different channels in order to obtain optimum
effects.
This assigns the digital input jacks for the different input
sources.
Input
source
Digital
Inputs
Front Sp.
Large
Center Sp. Surround Sp. Sub Woofer
Small Small Yes
Front & Subwoofer Center Surround L & R —
12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m) —
Front L Front R Center Surround R Subwoofer
0 dB 0 dB 0 dB 0 dB 0 dB
DVD/VDP TV/DBS
COAXIAL OPTICAL-1
Delay Time
This parameter is for optimizing the timing with which the audio
signals are produced from the speakers and subwoofer according to
the listening position.
Surround L
0 dB
1 Set the slide switch to “AUDIO”.
2 Use the following buttons to set up the system:
AUDIO
CD MD/CDR
VIDEO
This selects the subwoofer speaker for playing deep bass
signals.
Subwoofer mode = Normal
—
—
NOTE:
• The system setup is not displayed when “HEADPHONE ONLY” is selected.
CDR/TAPE
OPTICAL-2