Speaker system connections, English, L) (r) (l) (r) (l) (r) – Denon AVR-1802/882 Manuel d'utilisation

Page 14: Speaker impedance, Connecting the speaker cords

Advertising
background image

14

ENGLISH

Speaker system connections

• Connect the speaker terminals with the speakers making sure that like

polarities are matched (< with <, > with >). Mismatching of polarities will
result in weak central sound, unclear orientation of the various instruments,
and the sense of direction of the stereo being impaired.

• When making connections, take care that none of the individual conductors

of the speaker cord come in contact with adjacent terminals, with other
speaker cord conductors, or with the rear panel.

Speaker Impedance

• When speaker systems A and B are use separately, speakers with an

impedance of 6 to 16

/ohms can be connected for use as front speakers.

• Be careful when using two pairs of front speakers (A + B) at the same time,

since use of speakers with an impedance of 12 to 16

/ohms.

• Speakers with an impedance of 6 to 16

/ohms can be connected for use

as center and surround speakers.

• The protector circuit may be activated if the set is played for long periods of

time at high volumes when speakers with an impedance lower than the
specified impedance are connected.

NOTE:

NEVER touch the speaker terminals when the power is on.
Doing so could result in electric shocks.

Connecting the speaker cords

1. Loosen by turning

counterclockwise.

2. Insert the cord.

3. Tighten by turning

clockwise.

Connecting banana plugs

Turn clockwise to tighten, then insert the
banana plug.

CDR /

TAPE

CDR /

TAPE

DVD /

VDP

TV /

DBS

DVD /

VDP

TV /

DBS

VCR

-1

VCR

-2

VCR

-1

VCR

-2

VCR-1

FRONT

FRONT

PREOUT

CENTER

CENTER

DVD/

VDP

TV/

DBS

VCR-1

VCR-2

S-VIDEO

VCR-1

VCR-2 MONITOR

SUB

WOOFER

SPEAKER SYSTEMS

AC OUTLETS

SURROUND

AC 120V 60Hz

SWITCHED

TOTAL 120W(1A.)MAX.

PHONO

CD

SIGNAL
GND

MONITOR

VCR-2

VCR-1

VCR-2

OPT-2

OPT-2

OPT-1

FL

AM

ANTENNA TERMINALS

LOOP

ANT.

FM

COAX.

75

SL

EXT. IN

AUDIO

DIGITAL

VIDEO

C

FR

SR

SW

COAX.

SPEAKER IMPEDANCE

FRONT A OR B / 6 16

A + B / 12 16

CENTER / 6 16
SURROUND / 6 16

(L)

(R)

(L)

(R)

(L)

(R)

Connection jack for subwoofer with built-in
amplifier (super woofer), etc.

To achieve Dolby Digital (AC-3) playback
effect, use a unit that can sufficiently
reproduce frequencies of under 80 Hz.

SURROUND SPEAKER SYSTEMS

CENTER SPEAKER SYSTEM

FRONT SPEAKER SYSTEMS

• Precautions when connecting speakers

If a speaker is placed near a TV or video monitor, the
colors on the screen may be disturbed by the
speaker’s magnetism. If this should happen, move
the speaker away to a position where it does not
have this effect.

banana plug

System B

FRONT SPEAKER SYSTEMS

System A

Advertising