Troubleshooting, Maintenance, When something doesn’t work – Panasonic CQ-VX777EUC Manuel d'utilisation
Page 55: Product servicing, Replacing the fuse, Note, Error indication, Tape, Cd changer
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Troubleshooting
□ Maintenance
Your product is designed and manufactured to
ensure a minimum of maintenance. Use a soft
cloth for routine exterior cleaning. Never use
benzine, thinner, or other solvent.
□ When Something Doesn’t Work
Check the charts for possible causes and solu
tions to any problem you might be experiencing.
Some simple checks or minor adjustments may
eliminate the problem.
Error Indication
Tape
□ Product Servicing
If the suggestions in the charts don’t solve the
problem, we recommend that you take it to your
nearest authorized MSC(in Canada: Panasonic)
Servicenter. The unit should be serviced only by
a qualified technician.
□ Replacing the Fuse
Use fuses of the same specified rating (3, 10
amps). Using different substitutes or fuses with
higher ratings, or connecting the unit directly
without a fuse, could cause fire or damage to the
stereo unit.
If the replacement fuse fails, contact your nearest
MSC(in Canada: Panasonic) Servicenter for ser
vice.
Display
Description
PLEASE EJECT
Tape cannot be ejected in this state.
Press OPEN/CLOSE button.
CD
Display
Description
PLEASE EJECT
CD cannot be ejected in this state.
Close the front panel, then press A
CD Changer
Display
Description
CD is dirty or the wrong side up. The changer automatically selects the next
!.....
disk.
1"" •■"!
CD has a flaw or flaws.
The set is not operating due to some cause. Press the reset button on the
changer.
|., *j'
No disk is inside the CD/MD changer, or no magazine is in it.
Note:
The numerals before error symbols El and E2 are disc numbers.
CQ-VX777EUC
55