Panasonic CQ-VX777EUC - Manuel (Page 29)

or
Tape Program Search (TPS)
Press button 4 (TPS) to select TPS mode. Press or ►H as many
times as the number of programs you wish to skip. Then the tape is
ready for playing at the beginning of your selection.
TPS is kept displayed during TPS operation.
Example 1: To rewind the tape to the beginning of your current
selection
• Press button 4 (TPS) and press once.
Example 2: To rewind the tape to the beginning of the program
immediately preceding your current selection
• Press button 4 (TPS) and press twice.
Example 3: To wind the tape forward to the beginning of the next
program of your current selection
• Press button 4 (TPS) and press once.
Example 4: To wind the tape forward to the beginning of the third
program from your current selection
• Press button 4 (TPS) and press three times. •
• Press button 4 (TPS) again to release the mode.
Note;
The TPS function may not properly work in the following cases. However, this does not mean anything faulty.
• A cassette tape has an unrecorded part less than 4 seconds long between programs
• Programs may have a part too low in sound level or a silent part (particularly if they are of classical music).
Notes on Cassette Tapes
Tape Slack:
Use a pencil or similar object to take up the slack as
shown. If a loose tape is used, this may result in the
tape becoming tangled in the rotating parts of the
unit.
CQ-VX777EUC
29