Installation guide continued, Electrical connection, Before wiring connection – Panasonic CQ-VX777EUC Manuel d'utilisation
Page 52: Wiring accessories, Installation guide, Continued, B) (-) (+) (-)
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Installation Guide
continued
Electrical Connection
Before Wiring Connection
• To prevent damage to the unit, be sure to follow the connection diagram below.
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables
and should not be disconnected. Therefore, extra care should be taken to prevent short-circuits.
Note : For installation in cars with trip or navigational computers, all electronic memory settings previously regis
tered in the computer will be lost when the battery terminal is disconnected. Do not disconnect the battery in vehi
cles equipped with these units. Therefore, extra care should be taken to prevent short-circuits.
• This unit can be connected to an optional CD changer (CX-DP600EUC). For details consult your nearest
Panasonic dealers.
• For connection to a CD changer, refer to the operating instructions of the CD Changer (CX-DP600EUC).
* •
Caution;
• To prevent damage to the unit, be sure to follow the connection diagram below.
• Remove the covering of the leads about 5 mm long from their end before connecting.
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and
keep cable terminals free from touching any metal parts.
Radio antenna jack
W
This Model CQ-VX777EUC (Rear)
Wiring accessories
Accessory
Quantity
Power connector
1
Power connector
(an accessory)
* Auto antenna control power cord
(Connect it to the auto antenna control
power cord of the car.)
Blue (ANT-CONT MAX 0,1 A)
Caution:
Do not connect the auto antenna
control power cord directly to the
power terminal for driving tho auto
antenna (Othenwise, it will cause
trouble.)
Twin CD changar
control cord
(Not used)
BrowrVwhito stripe
(TWIN-CD C-CONT)
Connect the illumination cord to the
power line which Is connected to the
clearance lights of the car.
i----------
Orange wMhIte Stripe
(ILLUMINATION)
Orange (NAVI MLTTE)
Connect NAVI cord to Panasonic
navigation NAVI mute cord.
i______
Black
GROUND
______
,—54
(Connect to a clean,
bare metallic part ot
Red
Fuse
(ACC ЗА)
your vehicle.)
-prr^ Accessories power cord
(Connect it to the ACC
power connector of the car.)
Connect the battery power cord to a
terminal which is always live.
Yellow (BATTERY 10A)
ca:
Fuse
Blue w/white Stripe
(AMP-CONT MAX 0.1A)
(REAR R) Qf
00
(i vu/Black Stripe
BATTERY LEAD
(Connect the car battery)
External amplifier control power cord
(Connect it to an extyemal amplifier.)
White [I
(-b) (-) (+) (-)
Violet w/Black Stripe
(-I-) (-)
(-I-) (-)
52
LEFT SPEAKER RIGHT SPEAKER
(FRONT)
(FRONT)
CQ-VX777EUC
LEFT SPEAKER RIGHT SPEAKER
(REAR)
(REAR)