Speaker settings screen for multi-channel, O type of speakers to be connected – Panasonic DVD-PA65 Manuel d'utilisation
Page 39
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Speaker settings screen for Multi-channel
Speeka
O
Center
O
Front (L)
Exit
Test signal
O Surround (L)
O Surround (L)
O
Type of speakers to be connected
•Front (UR)
: Large/Small
•Center
; Large/Small/No
•Subwoofer
: Yes/No
•Surround (UR):
Large/Small/No
O
Center
O Surround
O
Center
O
Front (R)
O Subwoofer
O Subwoofer
O
Surround (R)
O
Surround (R)
Example:
surround speaker (L)
Large
Small No
m
®
□
“Large” speakers are capable of reproducing sounds under 100 Hz. “Small" speakers are
any other type.
O
Delay time (Dolby Digital DVD-Video, center/surround channel only)
The optimum position for speakers is to arrange them in a circle as shown. If you cannot do
this, changing the delay time can make up for differences in distance.
Surround
Distance A=Distance F-Distance C Distance B=Distance F-Distance S
Distance A
Delay time
Approx. 50 cm(1'/2 feet)
1.3 ms
Approx. 100 cm (3 feet)
2.6 ms
Approx. 150 cm (5 feet)
3.9 ms
Approx. 200 cm (6 feet)
5.3 ms
Distance B
Delay time
Approx. 200 cm (6 feet)
5.3 ms
Approx. 400 cm (12 feet)
10.6 ms
Approx. 600 cm (18 feet)
15.9 ms
0 Output balance
1 Select “Test” and press [ENTER].
A test signal is output from one speaker at a time, starting with the front left speaker and
proceeding clockwise.
Use the cursor jockey
[ A ,
▼] to adjust the volume of the center and surround speakers
so they are the same apparent volume as the front speakers.
2 Press [ENTER].
The test signal stops.
•There is no test signal output for the subwoofer. Play a source to check the level, then re
turn to this screen to adjust the volume if necessary.
RQT56K