Panasonic DVD-PA65 - Manuel (Page 33)

Connecting other equipment
Refer to the relevant pages for connection. Initial settings that need to be changed are indi­
cated in inverted commas {“").
What you want to do How to accomplish it Initial settings
Reference
page
Enjoy Dolby Digital
and DTS surround
sound with 3 or more
speakers
Analogue connection
Use the unit’s built-in
decoders and connect to
an amplifier with
5.1-channel inputs.
“7 Speaker Setting"
Digital connection
Connect digitally and use
the decoder in another
piece of equipment.
“6 Digital Audio Output”
34, 38
35, 40
Connect 2 speakers
to enjoy stereo sound
mmammm
Connect to a mini-system
or amplifier (including
Dolby Pro Logic
amplifiers).
“7 Speaker Setting”
Connect digitally to a
mini-system or amplifier.
“6 Digital Audio Output”
36. 38
36, 40
Record to a cassette
or MD deck
Analogue recording
‘7
Speaker Setting”
Digital recording “6 Digital Audio Output”
37, 38
37, 40
Use headphones 37
Peripheral equipment and cables shown on pages 34 to 37 sold separately un­
less otherwise indicated.
If digital connection is used, DVD-Audio linear PCM signals are converted to 48 kHz for out­
put. Use analogue connection to enjoy high quality 192 kHz and 96 kHz audio.
“192 kHz” lights on the unit's display to indicate
192 kHz software is being played.
imumm
• Disconnect all units from the AC power supply before commencing connection.
•Read through the instructions before connecting other equipment.
R0T5603