Recording the time code/user’s bit – Panasonic Hi-Fi Professional/Industrial Video DS850 Manuel d'utilisation
Page 50
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
3
o
O
o
a
o
Recording the time code/user’s bit
1.
Recording the optional (preset) time code/user’s bit
[1]
Set the “TC INT/EXT SELECT ” (item No. 7001) dial menu function to “INT.” (See page 46.)
[2]
Set the “TC MODE” (item No. 7002) dial menu function to “REC RUN.” (See page 46.)
[3]
Set the preset value using dial menu function item No. 7010 or No. 7011. (See page 47.)
• Set the “AUDIO CH2" (item No. 3006) dial menu function to “OFF” when the LTC time code is not to be
recorded. (See page 42.)
• Set the “VITC REC” (item No. 7003) dial menu function to “OFF” when the LTC time code is not to be recorded.
(See page 46.)
2.
Recording the continuous time code on the editing tape
[1]
Set the “TC INT/EXT SELECT” (item No. 7001) dial menu function to “INT.” (See page 46.)
[2]
Set the “TC MODE” (item No. 7002) dial menu function to “REGEN.” (See page 46.)
• Set the “AUDIO CH2” (item No. 3006) dial menu function to “AUDIO” when the LTC time code is not to be
recorded. (See page 42.)
• Set the “VITC REC” (item No. 7003) dial menu function to “OFF” when the VITC time code is not to be recorded.
(See page 46.)
3.
Dubbing the LTC signal recorded on the tape
(Dubbing the LTC signal with the settings below prevents
deterioration in the LTC time code signal.)
[1]
Set to “LTC” mode with the LTC/AUTO/VITC button. (See page 49.)
[2]
Set to “TC” mode with the CTUTC/UB button. (See page 49.)
[3]
Set the “TC MODE” (item No. 7002) dial menu function to “REGEN.” (See page 46.)
[4]
Set the “TC OUT SIGNAL REGEN” (item No. 7008) dial menu function to “REGEN.” (See page 46.)
50