Panasonic Hi-Fi Professional/Industrial Video DS850 - Manuel (Page 39)

Set-up menu screen
Operation/function set-up items
Item Set’Up value
Description of function
No. Superimpose display No. Superimpose display
1001 SYNC 00 L
01
NORM „71 ___________ '
EXT
Selects the sync signal.
00: Synchronization with the input video
signal.
01: Synchronization with the externa! sync
signal.
1002 STILL TIME SELECT 00
01
02
:03
2 SEC
30 SEC
1 MIN
5
m 1 n ^ “ ’
When the unit is in the STOP or STILL mode,
this selects the duration of time after which the
unit is automatically placed in the TAPE
PROTECTION mode in order to protect the
tape. The setting is valid from the next time the
STOP or STILL mode is activated.
1003 TAPE PROTECTION [ 00 ,__
01
READY 6 f F„______
AUTO ADVANCE
Selects the operation to be performed in the
TAPE PROTECTION mode. The setting is
valid from the next time the TAPE PROTEC­
TION mode is activated.
00: The READY OFF mode is established.
01: Each time the duration specified by the
STILL TIME SELECT setting elapses, the
tape is advanced three frames, and the
unit enters the READY OFF mode ap­
proximately 30 minutes later.
1004 READY OFF MODE
SELECT
00.__ ;
01
02
DRUM ROTATE I
DRUM STOP
UNLOADING Selects the operation in the READY OFF mode.
00: Drum rotates due to loose tape.
01: Drum stops due to loose tape.
02: Unloading
1005 DIRECT SEARCH 00
oi
OFF Selects the direct search mode.
00: Normal search operation
01: Unit is automatically placed in the search
mode when the search dial is operated
even without the search button being
pressed.
ON
1006 SHORT FF 00 OFF
ON_________________1 Selects the short FF function.
00: No short FF operation.
01: Short FF operation is conducted at tape
start.
1007 AUTO REW 00
oi.V_
OFF
ON 71 7„„711_7
Selects the auto rewind function.
00: Stops at tape end.
01: When the tape reaches the end, it is
automatically rewound to the start and the
unit stops operating.
1008 AUTO BACK ^00
01
Qpp - - ^
Sets the auto back space recording function.
00: Normal recording/pause mode
01: When the REC button is pressed in the
PLAY/STILL mode or if the PAUSE/STILL
button is pressed during recording, the
tape is rewound for about 3 seconds and
the unit is placed in the standby mode.
When the PAUSE/STILL button is then
pressed, the unit conducts playback for 3
seconds and then recording commences.
ON
[The shading denotes the initial setting.]
CO
5
39