Other switch settings, Setting the input switch, Vioeo – Panasonic Hi-Fi Professional/Industrial Video DS850 Manuel d'utilisation
Page 24: Line, Input, Setting the control switch, I edit, Remote, Local, Control
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Other switch settings
a c n a a
;5:-;6; :6;
B H a
B B B B(5
b
B0i
1 32
1.
Setting the INPUT switch
During editing this switch is set to the position corresponding
with the input signal.
S-VIDEO:
When recording video signals which have been
input to the SI-VIDEO IN connectors.
LINE:
When recording video signals which have been
input to the VIDEO IN connectors.
s-
VIOEO
LINE
H
t
INPUT
CO
(0
(D
5'
(O
0)
Setting the CONTROL switch
This is used to set the unit’s control mode.
REMOTE:
Set to this position for operating the unit by remote
control using an controller, etc. Only the unit’s eject
function will now be operational.
LOCAL:
Set to this position to operate the unit.
• The operation modes of this unit in the REMOTE mode can
be set using dial menu item No. 5001.
I
EDIT!
I
REMOTE
LOCAL
t
CONTROL
3.
Setting the DIGITAL SLOW switch
2:
Activates the noiseless slow mode. The search dial
range is-1/4x to +1x.
1
:
Activates the noiseless slow mode. The search dial
range is -32x to +32x.
OFF:
The noiseless slow mode is not activate.
MODE
2
OFF
D
B
GITAL
SLOW
i
4.
Setting the ON SCREEN button
This is used to add a time code or other superimpose signal to
the video signal which is output from the VIDEO MONITOR
connector.
MSCUffll
24