Make the connections as shown in the figure below, Tbc adjustments – Panasonic Hi-Fi Professional/Industrial Video DS850 Manuel d'utilisation
Page 25
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
TBC Adjustments
The TBC can be used to reduce the amount of jitter and distortion called skew (a phenomenon where the top part of
the picture is bent horizontally).
For AB roll editing (a method of editing using two source units) using an editor, the TBC must be adjusted after it has
been connected to the system so that the material will be edited accurately and error-free. (The TBC must be re
adjusted every time its connecting cable is replaced or its connections are changed.)
1.
Make the connections as shown in the figure below.
REF
(BB)
PI
REF
(BB)
P2
REF
(BB)
RECORDER
c
0)
E
«
<
u
m
H
["!] Supply the external reference signal from the sync signal
generator to the unit.
E2]
Provide a composite connection for the video signals.
25