Features ), Safety precautions – Panasonic PANASYNC S50 Manuel d'utilisation

Page 8

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

( Features )

The PanaSync S50 is a 15 inch CRT/14.0 inch viewable image size multhscanning color CRT
display with the following features:

1) Fine Dot Pitch Flat Square Cathode Ray Tube

Flat Square CRT with 0.27 mm Dot Pitch for sharp images and comfortable viewing.

2) Windows 95 Plug & Play ready.

VESA Display Data Channel (DDC) 1/2B Permits the S50 to automatically run at a high

refresh rate using Windows 95 Plug & Play.

3} Ergonomic Design

• MPR-n Low Emission Design
• Silica Anti-Glare and Anti-Static Coating
• Easy to use Up-fron1 controls

• Removable Tilt & Swivel stand Pans 90°to the right and left and tilts 13°up and 4° down.

4) Power Saving

Built in Energy Star compliant Power Management System based upon Video Electronic
Standards Association (VESA) Display Power Management Signaling (DPMS).

5) Factory Preset and User Memories

• 1 Factory Preset (Precise Setting)
• 7 Factory Reservations (Rough Settings)
• 8 User Memory-modes for your own settings

6) Multi-scan with digital techrxilogy

8 bit micro-computer controls the S50’s operation with a wide range of Horizontal (30 to
67 kHz) and Vertical (50 to 120 Hz) scanning frequencies.

7) LED Control Mode Indicators

Simplified LED Control Mode indicators show which control mode you have selected. The
LED will flash if the Horizontal or Vertical signal is outside of the specified range.

8) Self-Test Mode

The Self Test Mode is activated by pressing the Select Key. if the Signal Cable is not
connected or there is no video output from the computer due to it being in a power saving

mode, the monitor will enter the Self Test Mode. The Self-Test mode checks if the monitor
is working and displays a bright white screen if it is OK.

9) Superb display performance

• High Brightness
• Minimized distortion
• Full-scan images for graphics

10) Universal Power Supply

An Universal Power Supply automatically adjusts to the supplied 90 to 264 V AC power
50 or 60 Hz.

Safety Precautions

Use the supplied CSA & UL approved power cord in the USA and Canada only,

' The S50 should be installed near an easily accessible grourtded electrical outlet.

Do not use an extension cord.

— 3 —

Advertising