Display stand removal/replacementj, 1 .removing the monitor stand, Display stand removal/reptacemenl – Panasonic PANASYNC S50 Manuel d'utilisation
Page 13
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
( Display Stand Removal/ReplacementJ
Observe the following instructions if the unit is to be used with the display
stand removed.Repeat this procedure in the reverse order if the display stand
is to be re-attached.
1 .Removing the monitor stand
Lay the screen down onto a soft object (cushion,etc.) to
avoid scratching.
I
Grasp the bottom of the display stand as indicated in the illustra-
I
Apply pressure with yourfingers to the area shown in the illustration
and lift the starwJ slightly in an upward direction.This will release the
I Once the lock has been released, remove your fingers and
firmly lift upwards at an angle.
\ This will separate the stand from the main unit.
2. Installation
Place the unit on top of the computer to
be used or on a tabletop.
Store the display stand in the box or other
receptacle in which the computer was
purchased.
— 8 —