Connecting directly to video equipment, Preparations – Sony CPJ-A300 Manuel d'utilisation
Page 8
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Preparations
(continued)
Tip
This projector accepts
the video signals of
both NTSC and PAL
color systems.
Notes
• Turn off the video
equipment and the
projector before
connecting.
• Refer to the video
equipment's manual
as well.
If you switch from the
LASER LINK system
"VIDEO" appears
when you project the
picture. The display
will go off after 5
seconds.
Connecting directly to video
equipment
Connect video equipment such as a VCR or video
camera recorder using the supplied A/V
connecting cable.
Make sure that the LASER LINK indicator of the
control panel is off.
Front
to AUDIO OUT
Signal flow
(supplied)
' to
AUDIO
A/V connecting cable
,-EN Preparations