Sony XM-754HX - Manuel (Page 8)

Installation
Before Installation
• Mount the unit either inside the trunk or under a
seat.
• Choose the mounting location carefully so the unit
will not interfere with the normal movements of the
driver and it will not be exposed to direct sunlight or
hot air from the heater.
• Do not install the unit under the floor carpet, where
the heat dissipation from the unit will be
considerably impaired.
First, place the unit where you plan to install it, and
mark the positions of the four screw holes on the
surface of the mounting board (not supplied). Then
drill the holes approximately 3 millimeters (mm) in
diameter and mount the unit onto the board with the
supplied mounting screws. The supplied mounting
screws are 15 mm long. Therefore, make sure that the
mounting board is thicker than 15 mm.
Installation
Unit: mm (in.)
Un№: mm (po.)
0 6 (’/4)