Brother PQ1300 - Manuel (Page 21)

CONTENTS
Accessories
Names of
Parts
Before You
Begin
Changing
Needles and
Light Bulb
Threading
Stitch
Samples and Needle Chart
Changing
Presser Feet
Basic Sewing
Caring for
Your
Machine
Trouble Shooting
17
Item
Sewing Speed
(maximum)
Stitch Length
(pitch)
Stroke of
Needle
Stroke of
Thread Take-
Up Lever
Foot Height
Specification
1,300 stitches per minute
0 – 7mm
34.1mm
61.4mm
Foot Lift
One 6mm
Two 9mm
Knee control Over 10mm
Item
Height of feed dog
Height of
lower needle
Needles that
may be used
Bed dimensions
Total weight
Motor
Sewing Light
Sewing area
Specification
0.7mm 1.1mm
3mm – 3.5mm
HLX5#9 – #16
SCHMETZ 130/705H #65 – #100
439mmX178mm
10kg
120V 60Hz
120V 15W 60Hz
595mmX285mm
Caring for Your Machine
Note
Make sure power is off before
cleaning sewing machine.
1 Turn machine off.
2 Remove foot.
3 Remove needle plate.
4 Clean out dust and thread scraps.
✽ Thread scraps can be swept out
through the bobbin door.
■ Keep Your Sewing Machine Clean
Please use a soft, dry cloth to wipe off light dirt and
dust. If sewing machine is very dirty, wipe with a cloth
soaked in warm water, or in warm water containing a
neutral detergent. Then wipe off any detergent
residue, and wipe off water with a dry cloth.
■ Precautions
Please keep sewing machine away from heat sources
such as irons and space heaters. Do not use chemicals
like benzine or thinner to clean your machine. When
machine is not in use, please keep machine out of
direct sunlight.
5 When the area under the needle
plate is cleaned out, oil hook of
b o b b i n c a s e w i t h s e w i n g
machine oil.
6 Attach needle plate and foot.
Hook