Brother PQ1300 - Manuel (Page 13)

CONTENTS
Accessories
Names of
Parts
Before You
Begin
Changing
Needles and
Light Bulb
Threading
Stitch
Samples and Needle Chart
Changing
Presser Feet
Basic Sewing
Caring for
Your
Machine
Trouble Shooting
9
Threading (2)
Using the Automatic Needle Threader
1 Pull hand wheel towards you until
needle is in the highest position, and
lower presser foot.
2 Take thread in your left hand, and
gently pull it forwards.
5 Raise needle threader lever while
gently holding the end of the thread. 4 Catch thread with hook.
✽ Pull thread to the right, and make
sure it has been caught with the
hook.
3 Lower automatic needle threader.
✽ Pull thread along the right side of the
pin.
● Make sure thread take-up lever
is in highest position and presser
foot is up.
Note Please turn power is off before using automatic needle threader. Accidentally stepping on the foot controller during this operation could cause bodily injury or damage to the machine.
Upper Threading
1
2
6
7
8
9
0
A
3
4
5
1
2
3
5
6
4
7
8
9
0
A
✽ When using polyester, you
should run the thread through all
three holes of the thread guide.
✽ If the thread is still
twisted, run the
thread through the
holes backwards as
shown in diagram.
Automatic
Needle
Threader
Hook
Pin