Brother PQ1300 - Manuel (Page 18)

18
CONTENTS
Accessories
Names of
Parts
Before You
Begin
Changing
Needles and
Light Bulb
Threading
Stitch
Samples and Needle Chart
Changing
Presser Feet
Basic Sewing
Caring for
Your
Machine
Trouble Shooting
14
Basic Sewing (2)
Rolled Hem Foot
1 Attach rolled hem foot.
✽ Refer to page 12 for instructions
on changing sewing feet.
2 Insert needle approximately
0.5cm from the edges of the
fabric and sew 2-3 stitches.
3 Raise needle and foot, pull fabric
towards you while gently holding
thread in left hand.
4 Gently pull strands of thread
behind foot as shown.
5 While holding threads with left
hand, position fabric under foot
with right hand so the edge of the
fabric lies directly under the
needle.
6 Pull gently on threads in left hand
while sewing the first 3-4 stitches
to hold them in place.
7 Fold hem over about .5 cm and
continue feeding folded hem
under foot while sewing.
Note Make sure power is off before changing feet.
0.5cm
0.5cm
Rolled Hem