Speaker distance, The system setup menu 08 – Pioneer HTP-FS500 Manuel d'utilisation

Page 68

Advertising
background image

The System Setup menu

08

68

En

3

Confirm your selected setup option.

The test tones will start after you press

ENTER.

After the volume increases to the reference
level, test tones will be output.

4

Adjust the level of each channel using

/.
If you selected

Manual, use

/ to switch

speakers. The

Auto setup will output test tones

in the order shown on-screen:

Adjust the level of each speaker as the test tone
is emitted.

1

5

When you’re finished, press RETURN.

You return to the Manual SP Setup menu.

Tip

• You can change the channel levels at any

time by press

, then press

CH

SELECT and +/– on the remote control. You
can also press

CH SELECT and use

/ to

select the channel, and then use

/ to

adjust the channel levels.

Speaker Distance

For good sound depth and separation from
your system, you need to specify the distance
of your speakers from the listening position.
The system can then add the proper delay
needed for effective surround sound.

1

Select ‘Speaker Distance’ from the

Manual SP Setup menu.

2

Adjust the distance of each speaker using

/.
You can adjust the distance of each speaker in
0.1 m increments.

3

When you’re finished, press RETURN.

You return to the Manual SP Setup menu.

Note

1 • If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust

the level of each speaker to 75 dB SPL (C-weighting/slow reading).
• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual
soundtrack.

2b.Channel Level

Test Tone [ Manual ]

Please Wait . . .20

Caution
Loud test tones
will be output.



Return

2b.Channel Level

Front L
Center
Front R
Surround R
Surr. Back R
Surr. Back L
Surround L
Subwoofer

Return

[ 0dB]
[ 0dB]
[ 0dB]
[ ––– ]
[ ––– ]
[ 0dB]
[ 0dB]

0dB

2.Manual SP Setup

Return

a.Speaker Setting

b.

Channel Level

c.Speaker Distance

2c.Speaker Distance

Front L
Center
Front R
Surround R
Surr. Back R
Surr. Back L
Surround L
Subwoofer

Return

3.0 m

[ 3.0

m

]

[ 3.0

m

]

[ 3.0

m

]

[ –––– ]
[ –––– ]
[ 3.0

m

]

[ 3.0

m

]

HTP-700_VYXCN_En.book 68 ページ 2009年9月15日 火曜日 午前9時42分

Advertising
Ce manuel est liée aux produits suivants: