Pioneer HTP-FS500 - Manuel (Page 33)

Connecting up 02
33
En
English
Deutsch
Italiano
Español
Français
Nederlands
Connecting a satellite receiver or other digital set-top box
Satellite and cable receivers, and terrestrial digital TV tuners are all examples of so-called ‘set-top
boxes’.
1 Connect the composite video output on
your set-top box to the VIDEO TV/SAT input
on this system.
Use a standard RCA video cable.
• If the set-top box connected is equipped
with an HDMI output, an HDMI cable may
also be used for connection. In this case,
use an HDMI cable to connect the TV as
well.
2 Connect the audio output on your set-top
box to the AUDIO TV/SAT IN inputs on this
system.
Use a stereo RCA phono cable. If your
component has a digital output, you can also
use an optical cable or coaxial cable for the
connection.
1
1
1 2
HDMI OUT ANALOG R L
AUDIO OUT DIGITAL OUT
COAXIAL OPTICAL
VIDEO OUT
1 2
Select one
Select one
STB
Note
1 In this case, you’ll need to tell the system which digital input you connected the TV to (see Choosing the input signal
on page 48).
HTP-700_VYXCN_En.book 33 ページ ２００９年９月１５日 火曜日 午前９時４２分