Wall mounting the front speakers, Before mounting, 5 mm – Pioneer HTP-FS500 Manuel d'utilisation

Page 24

Advertising
background image

Speaker Setup (HTP-FS500)

01

24

En

6

Secure the speaker and the pole with 2

screws.

• Confirm that the speaker cable does not

become pinched between the pole and the
speaker.

Put the speaker cable in the back of the base
of

the stand.

Wall mounting the front
speakers

The front speakers have a mounting hole which
can be used to mount the speaker on the wall.

Before mounting

• Remember that the speaker system is

heavy and that its weight could cause the
screws to work loose, or the wall material to
fail to support it, resulting in the speaker
falling. Make sure that the wall you intend
to mount the speakers on is strong enough
to support them. Do not mount on plywood
or soft surface walls.

• Mounting screws are not supplied. Use

screws suitable for the wall material and
support the weight of the speaker.

Caution

• If you are unsure of the qualities and

strength of the wall, consult a professional
for advice.

• Pioneer is not responsible for any

accidents or damage that result from
improper installation.

5 mm

10 mm

Mounting screw

(not supplied)

5 mm to 7 mm

HTP-700_VYXCN_En.book 24 ページ 2009年9月15日 火曜日 午前9時42分

Advertising
Ce manuel est liée aux produits suivants: