Sony KDL-50W800B - Manuel (Page 11)

D:\SONY TV\SY140003_Clover 1 (Rev-1)\4488200121_US\US03STU.fm
KDL-50W800B/50W790B/42W700B/32W700B
4-488-200-12(1)
11 US
US
~
• If using an electric screwdriver, set the
torque at approximately 1.5 N·m
{15 kgf·cm}.
To detach the Table-Top Stand from the TV,
remove the screws
fixed in step 2.
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• When removing the Table-Top Stand from
the TV, lay the display face down on a stable
work surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on
the work surface.
• Once the Stand Necks are detached from
the Stand, be sure to keep the Stand Necks
and screws in a safe place.
• Be sure the TV is vertical before turning on.
To avoid uneven picture uniformity do not
power on the TV with the LCD panel facing
down.
• When attaching the Table-Top Stand again,
be sure to fasten the screws (previously
removed) to the original holes on the rear of
the TV.
Detaching the Table-Top
Stand from the TV
Soft cloth
Stand Necks
Stand