Sony CSS-HD1 - Manuel (Page 13)

1-GB
Viewing images on a TV
screen
You can playback images by connecting to the TV
with the AV connecting cable (supplied) or the
Component video cable (supplied).
1
Connect the Cyber-shot Station with the AV
connecting cable.
Connect the AV connecting cable (supplied) to
the AV OUT jack of the Cyber-shot Station and
the audio/video input jacks of the TV.
AV connecting cable
Red
White
Yellow
Audio
Video
To connect the Cyber-shot Station with
the Component video cable and the AV
connecting cable
Connect the Component video cable to the
COMPONENT OUT jack and the component
video input jacks of the TV, and connect the AV
OUT jack and the audio input jacks of the TV.
Refer to the operating instructions supplied
with the TV for connection.
Component video cable
AV connecting cable
Red
White
Yellow
Audio
Green
Blue
Red Y
P
b
/C
b
P
r
/C
r
–
Turn off both the camera and the TV before
connecting the Cyber-shot Station and the
TV with the Component video cable and the
AV connecting cable.
The signal format to be output via the
COMPONET OUT jack depends on the
camera.
To view the 1080i format images, you need
the TV compatible with 1080i format.
The Audio to be output via the AV out jack
is monaural.
When both the Component video cable and
the AV connecting cable is connected, the
images will be output via the COMPONENT
OUT jack, not via the AV OUT jack.
The Cyber-shot Station is not compatible
with the S-VIDEO connecting cable.

Turn on the power by pressing the
(playback) button of the camera or the
POWER button on the remote control.
Notes
The buttons on the camera or the remote
control may not function immediately after
the camera is attached to the Cyber-shot
Station. This occurs when the camera is
booting up and is not a malfunction. Wait for
about 10 seconds.

Turn on the TV and set the TV/Video switch
to “Video”.

Press / on the Control buttons of the
remote control to select the image.
You can also select the image by pressing /
on the Control buttons of the camera.
The Cyber-shot Station is compatible with both
NTSC and PAL TV systems. For further details,
see the operating instructions supplied with the
camera.








