Sony KDL-65S990A - Manuel (Page 20)

D:\SONY TV\SY130122_H31\4472757111_US\US03STU.fm
KDL-65S990A
4-472-757-11(1)
20 US
Using a Wall-Mount
Bracket
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of the
box as packaged. If the Table-Top Stand is
attached to the TV, the TV may require
detaching the Table-Top Stand.
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV’s weight.
• The length of the screw for Wall-Mount
Bracket differs depending on the
mounting hook thickness. Please see
below illustration.
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
~
• Read the supplied Safety Booklet for
additional safety information.
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• Make sure the Wall-Mount Bracket is
attached to the rear of the TV before
detaching the Table-Top Stand for wall
mounting.
• Do not put stress on the LCD panel or the
frame around the screen.
• Be sure the TV is vertical before turning on.
To avoid uneven picture uniformity do not
power on the TV with the LCD panel facing
down.
• When installing the TV on a wall, remove the
screws from the rear of the TV. Be sure to
store the removed screws in a safe place,
keeping them away from children.
• When attaching the Table-Top Stand again,
be sure to fasten the screws (previously
removed) to the original holes on the rear of
the TV.
1
Remove the screws from the TV. The
arrow marks indicate the location of
the screw holes used for securing the
Table-Top Stand.
8-12 mm
Screw
Mounting Hook
Hook attachment on rear of
TV set
Detaching the Table-Top
Stand
2
2