Sony STR-DA4400ES Manuel d'utilisation

Page 137

Advertising
background image

137

GB

A

d

ditio

n

al Inf

o

rm

ati
o

n

The source sound input from the HDMI
IN jack is not output from an amplifier
or the TV speaker connected to the
receiver.

• Check that the component is connected

correctly to the HDMI IN jack for that
component.

• The sound is not output when you display

the receiver’s menu on the TV monitor.
Press MENU to turn off the display.

• Depending on the playback component,

component may need to be set up. Refer to
the operating instructions supplied with
the each component.

• Be sure to use a connecting cable for the

HDMI jack corresponding to high speed
(an HDMI version1.3a, category 2 cable)
when you view images or listen to sound
during a Deep Color transmission.

The left and right sounds are
unbalanced or reversed.

• Check that the speakers and components

are connected correctly and securely.

• Adjust the balance parameters using the

Auto Calibration settings menu.

There is severe hum or noise.

• Check that the speakers and components

are connected securely.

• Check that the connecting cords are away

from a transformer or motor, and at least
10 feet (3 meters) away from a TV set or
fluorescent light.

• Move your TV away from the audio

components.

• Make sure you have grounded the U

SIGNAL GND terminal (only when a
turntable is connected).

• The plugs and jacks are dirty. Wipe them

with a cloth slightly moistened with
alcohol.

There is no sound, or only a very low-
level sound is heard from the center/
surround/surround back speakers.

• Select a “Cinema Studio EX” mode

(page 79).

• Adjust the speaker level (page 106).
• Make sure the center/surround speaker (s)

is (are) set to either “SMALL” or
“LARGE.”

There is no sound from the surround
back speakers.

• Some discs have no Dolby Digital

Surround EX flag even though the
packages have Dolby Digital Surround EX
logos.

There is no sound from the subwoofer.

• Check that the subwoofer is connected

correctly and securely.

• Make sure you have turned on your

speaker.

• When all speakers are set to “LARGE”

and “Neo:6 Cinema,” or “Neo:6 Music” is
selected, there is no sound from the
subwoofer.

The surround effect cannot be
obtained.

• Make sure the sound field function is on

(press MOVIE or MUSIC).

• Sound fields function only for signals with

a sampling frequency of up to 48 kHz.

Dolby Digital or DTS multi-channel
sound is not reproduced.

• Check that the DVD, etc. you are playing

is recorded in Dolby Digital or DTS
format.

• When connecting the DVD player, etc., to

the digital input jacks of this receiver,
make sure the setting for the digital audio
output of the connected component is
available.

Recording cannot be carried out.

• Check that the components are connected

correctly (page 25).

• Select the source component (page 53).

continued

Advertising