Sony STR-DA4400ES - Manuel (Page 121)

121 GB
Ad
justi
ng Se
ttings
To change the display
You can check the sound field, etc., by
changing the information on the display.
1 Press AMP.
The receiver can be operated using the
remote.
2 Select the input for which you want to
check the information.
3 Press DISPLAY repeatedly.
Each time you press DISPLAY, the display
will change as follows.
Input you selected
t Sound field type t
Stream Information t Input name ...
When listening to FM and AM radio
Station name
t Frequency t Sound field
type t Volume...
Index name appears only when you have
assigned one to the input or preset station.
Index name does not appear when only
blank spaces have been entered.
When tuning in a channel from a satellite
tuner
Channel name
t Channel number t
Category t Artist name t Song title t
Composer name (SIRIUS only) t Signal
strength t Sound field type
HDMI Settings CTRL FOR HDMI [xxx] OFF, ON OFF
AUDIO OUT [xxxxxx] TV+AMP, AMP AMP
SW LEVEL [xxxdB] AUTO, +10dB, 0dB AUTO
System Settings NAME IN ? [xxxxxxxx]
12V TRIG. MAIN [xxxxx] OFF, CTRL, ZONE, INPUT OFF
12V TRIG. ZONE2 [xxxxx] OFF, CTRL, ZONE, MAIN OFF
12V TRIG. ZONE3 [xxxxx] OFF, CTRL, ZONE, MAIN OFF
RS-232C CONTROL [xxx] OFF, ON ON
Menu Item Parameter Initial
setting