Sony MHC-W55 - Manuel (Page 28)

EN
For Your Information
28
Index to Parts and
Controls
Refer to the pages indicated in parentheses
for details on how to use the controls.
Controls with an asterisk have indicators
on themselves.
Front Panel
Amplifier/Tuner section
1 SYSTEM POWER button (7)
2 MENU 1-4 buttons (19)
3 EFFECT ON/OFF button (19)
4 TIMER button (6, 22)
5 SLEEP button (22)
6 KARAOKE PON/MPX button (24)
7 TUNER MEMORY button* (12)
8 CLOCK SET button* (6)
9 TIMER SET button* (22)
0 TIMER SELECT button* (23)
!¡ TUNING MODE button* (11)
!™ P FILE button (21)
!£ MEMORY button (21)
!¢ SURROUND button (20)
!∞ TUNER/BAND button (11)
!§ DISPLAY button (6, 8)
!¶ FUNCTION button (8, 14)
!• ENTER/NEXT button* (6, 9, 12, 19, 22)
!ª MIC LEVEL knob (24)
@º MIX MIC jack (24)
@¡ PHONES jack (19)
@™ VOLUME knob (19)
@£ DBFB button (19)
@¢ GROOVE button (19)
@∞ JOG dial (6, 11, 15, 19, 22)
@§ FREQUENCY +/– buttons (20)
Tape player section
Recording system
4-track 2-channel stereo
Frequency response
(DOLBY NR OFF)
40 – 13,000 Hz ( ±3 dB),
using Sony TYPE I cassette
40 – 14,000 Hz ( ±3 dB),
using Sony TYPE II cassette
40 – 15,000 Hz (±3 dB)
using Sony TYPE IV cassette
Wow and flutter
0.1% WRMS ±0.3% (DIN)
Speaker
SS-W55G
Speaker system
3-way, 5-unit,
bass-reflex type
Speaker units
Woofer: 17 cm dia., cone type
Center Tweeter:
6 cm dia., cone type
Side Tweeter: 5 cm dia., cone type x2
Super Tweeter:
2 cm dia., dome type
Nominal impedance
6 ohms
Dimensions Approx. 220 x 410 x 285
mm (w/h/d)
Mass Approx. 4.8 kg
net per speaker
Supplied accessories
AM loop aerial (1)
Remote RM-SW55 (1)
Sony SUM-3 (NS) batteries (2)
FM lead aerial (1)
Speaker cords (2)
General
Power requirements
Australian model:
240 V AC, 50/60 Hz
Other models:
110 – 120 V or 220 – 240 V AC
Adjustable, 50/60 Hz
Power consumption
230 watts
Dimensions
Amplifier/Tuner section:
Approx. 280 x 205 x 345 mm
(w/h/d)
Tape/CD section:
Approx. 280 x 205 x 350 mm
(w/h/d)
Mass
Amplifier/Tuner section:
Approx. 6.4 kg
Tape/CD section:
Approx. 4.4 kg
Design and specifications are subject to
change without notice.
Tuner section
FM stereo, FM/AM superheterodyne
tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz
(76.0 – 108.0 MHz)*
Aerial terminals 75 ohm unbalanced
Intermediate frequency
10.7 MHz
* For customers who purchased the unit in
Japan.
AM tuner section
Tuning range
Latin-American and Australian
models:
AM: 530 – 1,710 kHz
(with the AM tuning
interval set at 10 kHz)
531 – 1,602 kHz
(with the AM tuning
interval set at 9 kHz)
Other models:
MW: 531 – 1,602 kHz
(with the MW tuning
interval set at 9 kHz)
SW: 5.95 – 17.90 MHz
Aerial AM loop aerial
External aerial
terminals
Intermediate frequency
450 kHz
Amplifier section
Continuous RMS power output
75 + 75 watts
(6 ohms at 1 kHz,
5% THD)
Peak music power output
1,200 watts
Inputs
MD IN (phono jacks):
voltage 450 mV,
impedance 47 kilohms
MIX MIC (phone jacks):
sensitivity 1 mV,
impedance 10 kilohms
Outputs
MD OUT (phono jacks):
voltage 250 mV
impedance 1 kilohms
PHONES (stereo phone jack):
accepts headphones of 8 ohms
or more.
FRONT SPEAKER:
accepts impedance of 6 to
16 ohms.
SURROUND SPEAKER:
accepts impedance of 16 ohms.
1
2
3
4
8
7
9
!¡
0
!∞
!§
!£
!¢
!•
@º
!ª
!¶
@¡
@™
@£
@¢
@∞
@§
5
6
!™