Aube Technologies TA7210 - Manuel (Page 12)

Installation Guide
12
Installer setup table
Temperature unit / Time format
Follow this procedure to select the temperature unit (°C or °F) and time format (12h or 24h).
Setup function Options Default setting To modify, see
Temperature unit °C / °F °C Page 12
Time format 12h / 24h 24h Page 12
Minimum setpoint 5°C to 30°C (41°F to 86°F) 5°C (41°F) Page 13
Maximum setpoint 5°C to 30°C (41°F to 86°F) 30°C (86°F) Page 13
Programmable mode On / Off On Page 14
Keypad lock None / Partial / All None Pages 15
Zone name 1, ..., 57 52 Pages 16-17
Adaptive Intelligent Recovery On / Off On Page 18
Anti-freeze On / Off On Page 18
To set the date & time, the schedule and the automatic daylight savings, refer to
User’s Guide.
The time format selection is available only if the thermostat is in programmable
mode.
# Display Button Step
1)
From the installer’s setup
menu, press Ok to select
the Format menu.
2) Press or to change
the temperature unit. Press
Ok.
3) Press or to change
the time format. Press Ok.
69-2472EF-01 (Aube TA7210 System Installation Guide).book Page 12 Wednesday, June 29, 2011 1:15 PM