Playing back a tape visionnez une cassette – Samsung SC-L907-XAP Manuel d'utilisation

Page 54

Advertising
background image

ENGLISH

FRANÇAIS

54

Playing back a Tape

Visionnez une cassette

Notes:

■ SCL901/L903/L906/L907 feature a monaural audio system.

If your TV or VCR features a stereo audio system, connect
the audio cable to input “L” of your TV or VCR.

■ You can use an S-VIDEO cable to obtain better quality of

pictures if you have a S-VIDEO connector on your TV.

■ While playing back on a TV screen, close the LCD panel.

Otherwise, picture distortion may occur.

Playback

1.

Use the TV/VIDEO button to select VIDEO on your TV.

2.

Connect power source (battery or AC
Power Adapter) to the camcorder.
Set the power switch to PLAYER mode.

3.

Insert a tape you want to see.

■ Make sure that STOP is displayed.

4.

Press the

(PLAY/STILL) button.

■ The picture you recorded appears on

the TV after 2 to 3 seconds.

■ Press ■ (STOP) to stop playing.

■ If the tape reaches its end during

playback, the tape will rewind
automatically.

Notes:

■ Vibration from the built-in speaker can cause picture

distortion.

■ It is best to turn the built-in speaker off when your

camcorder is connected to the TV.

■ The system (Hi8/8mm) is selected automatically,

depending on the tape format.

■ This camcorder does not support LP recording and

playback.

Remarques:

■ Les modèles SCL901/L903/L906/L907 possèdent un sys-

tème audio monophonique. Si votre téléviseur/magnéto-
scope est doté d’un tel système, connectez le câble audio
sur l’entrée “L” du téléviseur ou du magnétoscope.

■ Vous pouvez brancher le câble S-VIDEO fourni sur votre

téléviseur, afin dóbtenir une meilleure qualité d’image.

■ Lorsque vous visionnez une cassette à l’écran de votre

téléviseur, fermez l’écran LCD pour ne pas provoquer
d’interférences.

Lecture

1.

Appuyez sur la touche TV/VIDEO pour choisir le mode
VIDEO sur le téléviseur.

2. Connectez une source d’alimentation au

caméscope (bloc batterie ou adaptateur
secteur).
Placez le commutateur sur la position
PLAYER.

3. Insérez la cassette à visionner.

■ Assurez-vous que “STOP” est

affiché à l’écran.

4. Appuyez sur la touche

(PLAY/STILL).

■ Les images enregistrées apparais-

sent à l’écran au bout de deux ou
trois secondes.

■ Appuyez sur ■ (STOP) pour arrêter la lecture.

■ Si la cassette arrive à la fin de la bande,

celle-ci se rembobine automatiquement.

Remarques:

■ La vibration du haut-parleur peut perturber l’image.

■ Il est préférable de l’éteindre lorsque le caméscope est

connecté au téléviseur.

■ Le système (Hi8/8 mm) sont sélectionnés

automatiquement selon le format de la cassette.

■ Ce caméscope ne dispose pas de fonctions

d'enregistrement et de lecture longue durée (LP).

PLAYER

PLAY/STILL

00732B SCL901 USA+FRA(46-71) 1/14/04 8:40 AM Page 54

Advertising