JVC KD-R921 Manuel d'utilisation
Page 28
28
ENGLISH
Menu item
Selectable setting, [ Initial: Underlined ]
Dimmer
Dimmer Set Auto : Changes the display and button illumination between the Day/Night adjustments in
<Brightness>/<Color Setup> setting when you turn off/on the car headlights *
2
. /
Time Set : Sets the start/end timer for dimmer. Turn the control dial to adjust the start
time, then press the control dial to confirm. Repeat this step to enter the end time. /
On : Selects the Night adjustments in <Brightness>/<Color Setup> setting
for the display and button illumination. /
Off : Selects the Day adjustments in
<Brightness>/<Color Setup> setting for the display and button illumination.
Brightness
Day [ 23 ] / Night [ 11 ] : Customizes the display and button illumination brightness
level [
00 — 31 ] for day and night.
• Pressing
BRIGHTNESS can enter <Day Brightness> or <Night Brightness> menu
directly.
Display
Scroll
*
3
Once : Scrolls the displayed information once. / Auto : Repeats scrolling (at 5-second
intervals). /
Off : Cancels.
(Pressing
DISP for more than one second can scroll the display regardless of the setting.)
Tag Display On : Shows the Tag information while playing MP3/WMA/WAV tracks. / Off : Cancels.
LCD Type
Negative : Negative pattern of the display. / Positive : Positive pattern of the display. /
Auto : Positive pattern will be selected during the day time *
4
; while negative pattern will
be used during the night time *
4
.
Contrast
Level 01 — Level 08 [ Level 05 ] : Adjust the display contrast to make the display
indications clear and legible.
EQ/DSP
EQ
For settings, see page 23.
Time
Alignment
For settings, see page 24.
D. T.
Expander *
5
On : Digital Track Expander feature compensates high frequency sound for compressed
digital tracks (eg. digital music sources). /
Off : Cancels.
• Digital Track Expander effect can be heard in the following conditions:
MP3/WMA: Bit rate: 64 kbps to 128 kbps; Sampling frequency: 44.1 kHz, 48 kHz only
iPod/iPhone music files: Sampling frequency: 44.1 kHz, 48 kHz only
Audio
Fad/Bal *
6,
*
7
Fad (fader) : F6 — R6 [ 0 ] : Press
5 / ∞ to adjust the front and rear speakers output
balance. /
Bal (balance) : L6 — R6 [ 0 ] : Press
4 / ¢ to adjust the left
and right speakers output balance.
Loud *
8
Loud1/ 2/ 3 : Boost low and high frequencies to produce a well-balanced sound at a low
volume level. /
Off : Cancels.
*
2
The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting
may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case,
change the setting to any other than <Dimmer Auto>.
*
3
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
4
Depends on the <Dimmer Set> setting.
*
5
No effect in case of CD-DA or Bluetooth audio.
*
6
If you are using a two-speaker system, set the fader level to <00>.
*
7
This adjustment will not affect the subwoofer output.
*
8
If SOUND 1/ 2/ 3 is selected as the sound mode (page 23), you cannot make any setting. “Fix (My Sound)”
appears.
EN02-37_KD-R921BT_003A_2.indd 28
EN02-37_KD-R921BT_003A_2.indd 28
2/9/11 9:54:44 AM
2/9/11 9:54:44 AM