JVC KD-R921 - Manuel (Page 26)

26 ENGLISH
1
2
] <Audio> ] <X’over HPF/LPF>
X’over HPF/LPF
Easy
Pro
3
] Select the adjustment method
[ Easy/ Pro ].
4 If “Easy” is selected in step 3...
HPF/LPF
Front
Full
cm/inch
1 Press 4 / ¢ to select the
speaker [ Front/ Rear/ Subwoofer * ].
* Displayed only when <On> is selected for
<Subwoofer On/Off>. (page 29)
2 Turn the control dial to select the
speaker size.
Front/ Rear :
Full [ Initial ]/ 10cm (4”)/
13cm (5-1/4”)/ 16cm (6-1/2”)/
17cm (6-3/4”)/ 18cm (7”)/
10x15cm (4x6”)/ 13x18cm (5x7”)/
15x20cm (6x8”)/ 15x23cm (6x9”)/
18x25cm (7x10”)
Subwoofer :
Full/ 16cm (6-1/2”)/ 20cm (8”)/
25cm (10”) [ Initial ]/ 30cm (12”)/
38cm over (15” over)
3 Press 5 / ∞ to select the
measurement unit [ cm/ inch ].
4 Press the control dial to confirm the
settings.
If “Pro” is selected in step 3...
HPF/LPF
Front
HPF Off
–18dB/Oct
1 Press 4 / ¢ to select the
speaker [ Front/ Rear/ Subwoofer * ].
* Displayed only when <On> is selected for
<Subwoofer On/Off>. (page 29)
2 Turn the control dial to select the cut
off frequency.
Front/ Rear :
HPF 30Hz — HPF 200Hz : Activates
the High Pass Filter (HPF). Frequencies
lower than the selected frequency are
cut off from the front/rear speakers.
HPF Off [ Initial ] : Deactivates HPF
(all signals are sent to the front/rear
speakers).
Subwoofer :
LPF 30Hz — LPF 200Hz :
[ Initial: LPF 80Hz ] : Activates the Low
Pass Filter (LPF). Frequencies lower
than the selected frequency are sent
to the subwoofer.
LPF Off : Deactivates LPF (all signals
are sent to the front/rear speakers).
3 Press 5 / ∞ to select the quality of
HPF/LPF [ –12dB/oct/ –18dB/oct/
–24dB/oct ].
[ Initial:
Front/ Rear : –18dB/oct,
Subwoofer : –12dB/oct ]
4 Press the control dial to confirm the
settings.
[Hold]
Setting the crossover High/Low Pass Filter—X’over HPF/LPF
EN02-37_KD-R921BT_003A_f.indd 26 EN02-37_KD-R921BT_003A_f.indd 26 2/18/11 9:52:03 AM 2/18/11 9:52:03 AM