JVC KD-R921 - Manuel (Page 13)

13 ENGLISH
Using Bluetooth ® devices
Bluetooth is a short-range wireless radio communication technology for the mobile device such
as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected
without cables and communicate with each other.
By connecting the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals
of this unit, you can operate a Bluetooth device using this unit.
Once the USB Bluetooth Adapter is attached, this unit is always available for pairing.
• Only one USB Bluetooth Adapter can be detected at a time.
• Refer also to the instructions supplied with the Bluetooth device.
• Refer to pages i and ii at the end of the document to check the countries where you may use
the Bluetooth function.
This unit supports the following Bluetooth profiles
• HFP (Hands-Free Profile) 1.5
• OPP (Object Push Profile) 1.1
• PBAP (Phonebook Access Profile) 1.0
• A2DP (Advanced Audio Distribution Profile) 1.2
• AVRCP (Audio/Video Remote Control Profile) 1.3
1
] Turns on the power.
2
] Make sure USB Bluetooth Adapter
is connected to one of the USB input
terminals.
USB input terminal
KS-UBT1 (supplied)
or
USB cable from the
rear of the unit
Connecting a Bluetooth device
When you connect a Bluetooth device to the
unit for the first time, make pairing between
the unit and the device.
• Once the connection is established, it is
registered in the unit even if you reset the
unit. Up to five devices can be registered in
total. “Pairing Full” appears if you try to pair
the 6th device.
• This unit supports Secure Simple Pairing (SSP).
• Pairing sequence may be different from what
is described on the following.
• A maximum of two devices for Bluetooth
phone and one for Bluetooth audio can be
connected at a time.
Continued...
EN02-37_KD-R921BT_003A_2.indd 13 EN02-37_KD-R921BT_003A_2.indd 13 2/9/11 9:54:40 AM 2/9/11 9:54:40 AM