Whirlpool 9753051 - Manuel (Page 12)

12
USING YOUR RANGE
U
SING THE MINUTE TIMER
( CONT
.
)
S
TARTING
/
CANCELING A FUNCTION
START
TIMER
(display counts down)
YOU SEE
SET
TIMER
PRESS YOU SEE
2. Set the time.
Press the “up” ( ) or “down” ( ) button(s) until
the correct time shows on the display.
3. Start the minute timer.
The minute timer will begin counting down
immediately after the timer is started.
When time is up:
You will hear four 1-second tones every minute until
you press the OFF button.
NOTES:
• To display the time of day when the minute timer
is counting down, press the CLOCK button.
• To remove the reminder tones, press and hold the
TIMER SET button for 5 seconds. To bring back
the tones, follow the same step. You will see
“OFF” on the display when the tones are turned
off and “On” when they are turned on.
After setting a function, you must press the START
button to start the function. If you do not
press the START button within 5
seconds, “START?” will appear as a
reminder.
The OFF button will cancel any function except clock,
minute timer, and control lock. When you
press the OFF button, the display will show
the time of day, or, if the minute timer is also
being used, the time remaining. START OFF
TIMER
OFF
PRESS YOU SEE
(previous display)
PRESS YOU SEE
(previous display)
PRESS YOU SEE
HR MIN TIMER
(example for 10 minutes)
OR
4. Turn off the minute timer.
5. To cancel the minute timer:
Press the TIMER OFF button.
TIMER
OFF