Panasonic PT DW10000U - Manuel (Page 96)

96 – ENGLISH
Adjust clock page
Click [Network set up], then [Adjust clock] to display the Adjust clock page.
Note
If the time becomes incorrect immediately after setting the correct time, then the battery needs to be changed.
Contact the dealer where you bought the projector to have the battery changed.
Network config page
Click [Network set up], then [Network config] to display the Network config page.
■
•
■
Time zone selection
Button to update time zone setting
Button to update time and date
settings
New date field
New time field
Time zone selection
Button to update time zone setting
Button to update time and date
settings
New date field
New time field
Set this to ON to enable the DHCP
client function.
Enter the IP address if DHCP server
is not used.
Enter the net mask if DHCP server is
not used.
Enter the port number here. Number
80 is normally used.
Enter the gateway address if DHCP
server is not used.
Enter the name of the projector
here. Enter the host name here if it
is required when the DHCP server is
going to be used, for instance.
Set this to ON to enable the DHCP
client function.
Enter the IP address if DHCP server
is not used.
Enter the net mask if DHCP server is
not used.
Enter the port number here. Number
80 is normally used.
Enter the gateway address if DHCP
server is not used.
Enter the name of the projector
here. Enter the host name here if it
is required when the DHCP server is
going to be used, for instance.
How to use network function (continued)