Panasonic PT DW10000U - Manuel (Page 92)

92 – ENGLISH
E-mail setup page (continued)
■
Periodic warning interval setting
(E-mail is sent on the checked days of
the week/times) Periodic warning interval setting
(E-mail is sent on the checked days of
the week/times)
Enter the E-mail address to which the
E-mail is to be sent when two E-mail
addresses are going to be used. Do
not enter it when the second E-mail
address is not going to be used.
Select the conditions for sending
E-mail.
MAIL CONTENTS:
Select “NORMAL” or “SIMPLE”.
ERROR:
an error is detected by self-diagnosis.
LAMP1 RUNTIME:
remaining lamp service time has
reached the value set in the field.
LAMP2 RUNTIME:
remaining lamp service time has
reached the value set in the field.
LAMP3 RUNTIME:
remaining lamp service time has
reached the value set in the field.
LAMP4 RUNTIME:
remaining lamp service time has
reached the value set in the field.
INPUT AIR TEMPERATURE:
intake air temperature has reached the
value set in the field.
OUTPUT AIR TEMPERATURE:
exhaust temperature has reached the
value set in the field.
Enter the E-mail address to which the
E-mail is to be sent when two E-mail
addresses are going to be used. Do
not enter it when the second E-mail
address is not going to be used.
Select the conditions for sending
E-mail.
MAIL CONTENTS:
Select “NORMAL” or “SIMPLE”.
ERROR:
an error is detected by self-diagnosis.
LAMP1 RUNTIME:
remaining lamp service time has
reached the value set in the field.
LAMP2 RUNTIME:
remaining lamp service time has
reached the value set in the field.
LAMP3 RUNTIME:
remaining lamp service time has
reached the value set in the field.
LAMP4 RUNTIME:
remaining lamp service time has
reached the value set in the field.
INPUT AIR TEMPERATURE:
intake air temperature has reached the
value set in the field.
OUTPUT AIR TEMPERATURE:
exhaust temperature has reached the
value set in the field.
How to use network function (continued)