Panasonic PT DW10000U - Manuel (Page 58)

58 – ENGLISH
Adjusting the zoom ratio
This adjusts the size of the projected pictures.
1. Press
▲▼ to select “ZOOM”.
2. Press ENTER.
The “ZOOM” screen will be displayed.
3. Press ▲▼ to select “MODE”.
4. Press
◄► to switch “MODE”.
The setting will change as follows each time
◄► is pressed.
INTERNAL:
Enlarges the size of the pictures to within the
default aspect ratio.
FULL:
Enlarges the pictures using the whole of the
display area.
5. Press
▲▼ to select
“INTERLOCKED”.
•
•
•
•
ENTER
POSITION
SHIFT
ASPECT
ZOOM
CLOCK PHASE
KEYSTONE
MENU SELECT
SUB MENU
DEFAULT
0
ENTER
POSITION
SHIFT
ASPECT
ZOOM
CLOCK PHASE
KEYSTONE
MENU SELECT
SUB MENU
DEFAULT
0
ZOOM
MODE
INTERLOCKED
V
H
HV
MENU SELECT
CHANGE
INTERNAL
OFF
100%
100%
100%
ZOOM
MODE
INTERLOCKED
V
H
HV
MENU SELECT
CHANGE
INTERNAL
OFF
100%
100%
100%
INTERNAL FULL INTERNAL FULL
ZOOM
MODE
INTERLOCKED
V
H
HV
MENU SELECT
CHANGE
INTERNAL
OFF
100%
100%
100%
ZOOM
MODE
INTERLOCKED
V
H
HV
MENU SELECT
CHANGE
INTERNAL
OFF
100%
100%
100%
6. Press ◄► to switch
“INTERLOCKED”.
The setting will change as follows each time
◄► is pressed.
OFF :
The “V” and “H” settings are used as the vertical
and horizontal zoom ratios respectively.
ON :
The zoom ratio is set to the “HV” setting. This
allows the pictures to be zoomed at equal
vertical and horizontal ratios.
Note
When “ASPECT” is set to “THROUGH”, “ZOOM” will
not appear.
Clock phase adjustment
Clock phase adjustment achieves the best image
when the screen flickers or halo is observed around
the contour.
1. Press
▲▼ to select “CLOCK
PHASE”.
2. Press
◄► to adjust the level.
The value changes from 0 to 31. Adjust so that
the amount of interference is at a minimum.
Note
No optimal value may be obtained if the output
of the PC to which the signal input is applied is
unstable.
No optimal value may be obtained if the total
number of dots is not correct.
The clock phase can be adjusted only when RGB
signal input is applied with RGB1 and RGB2 IN.
•
•
•
•
•
•
•
•
OFF ON OFF ON
POSITION
SHIFT
ASPECT
ZOOM
CLOCK PHASE
KEYSTONE
MENU SELECT
ADJUST
DEFAULT
0
POSITION
SHIFT
ASPECT
ZOOM
CLOCK PHASE
KEYSTONE
MENU SELECT
ADJUST
DEFAULT
0
Adjusting the position (continued)