Removing the front panel 9, Attaching the front panel 9, About the demo mode 9 – Pioneer DEH-P770MP Manuel d'utilisation

Page 9: Reverse mode 9, About the demo mode, Before you start, Removing the front panel, Attaching the front panel, Reverse mode

Advertising
background image

! If the front panel is not detached from the

head unit within five seconds of turning off

the ignition, a warning tone will sound.

! You can turn off the warning tone. See

Switching the warning tone on page 54.

Important

! Never use force or grip the display and the

buttons too tightly when removing or attach-
ing.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press OPEN to open the front panel.

2 Grip the left side of the front panel and

pull it gently outward.

Take care not to grip it too tightly or to drop

the front panel and protect it from contact

with water or other fluids to prevent perma-

nent damage.

3 Put the front panel into the protective

case provided for safe keeping.

Attaching the front panel

% Replace the front panel by holding it

upright to the unit and clipping it securely

into the mounting hooks.

About the demo mode

This unit features two demonstration modes.

One is the reverse mode, the other is the fea-

ture demo mode.

! You cannot cancel a demo mode when the

front panel is open.

Important

The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.

Reverse mode

If you do not perform an operation within

about 30 seconds, screen indications start to

reverse, and then continue reversing every 10

seconds. Pressing button 5 when power to

this unit is turned off while the ignition switch

is set to ACC or ON cancels the reverse mode.

Press button 5 again to start the reverse

mode.

Before You Start

En

9

English

Section

01

Advertising