Pioneer DEH-P770MP - Manuel (Page 46)

Introduction of advanced
XM tuner operation
1
1 Function display
Shows the function names.
1 Press Multi-Control to display the main
menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use Multi-Control to select FUNCTION.
Channel mode appears on the display.
# To return to the channel display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the channel display.
Switching the XM display
% Press DISPLAY to switch the XM display.
Each press of DISPLAY changes the XMdis-
play in the following order:
Channel nameArtist name/featureSong/
program titleChannel category
Storing and recalling
broadcast stations
If you press any of the preset tuning buttons
16 you can easily store up to six broadcast
stations for later recall with the touch of a
button.
% When you find a station that you want
to store in memory press one of NUMBER
(16) buttons on the remote control and
hold until the XM preset number stops
flashing.
The number you have pressed will flash in the
XMpreset number indicator and then remain
lit. The selected station has been stored in
memory.
The next time you press the same preset tun-
ing button the station is recalled from mem-
ory.
Notes
! Up to 18 stations, six for each of three XM
bands can be stored in memory.
! You can also recall stations assigned to
NUMBER (16) buttons on the remote control
pushing Multi-Control up or down.
Swiching the XM channel
select setting
You can switch if you select a channel with a
channel number or from a channel category
when you select a channel.
1 Press Multi-Control to display the main
menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use Multi-Control to select FUNCTION.
Channel mode appears on the display.
XM tuner
En
46
Section
10