Pioneer SX-315 - Manuel (Page 9)

Connecting up 02
9
En
English
Connecting antennas
Connect the AM loop antenna and the FM wire antenna
as shown below. To improve reception and sound quality,
connect external antennas (see
Using external antennas
below). Always make sure that the receiver is switched off
and unplugged from the wall outlet before making or
changing any connections.
FM wire antenna
Connect the FM wire antenna and fully extend along a
window frame or another suitable place that gives good
reception.
AM loop antenna
Assemble the antenna and connect to the receiver.
Attach (if necessary) and face in the direction that gives
the best reception.
If you want to attach the loop antanna to a wall, assemble
as shown below.
Antenna snap connectors
Twist the exposed wire strands together and insert into
the hole, then snap the connector shut.
Using external antennas
To improve FM reception
Connect an external FM antenna.
To improve AM reception
Connect a 15–18 ft. (5–6 m) length of vinyl-coated wire to
the AM antenna terminal without disconnecting the
supplied AM loop antenna.
For the best possible reception, suspend horizontally
outdoors.
SX-315
SPEAKERS
ANTENNA
FM UNBAL 75 Ω
+
–
AUDIO
DIGITAL INPUT
TV IN
(OPTICAL)
(COAXIAL)
STB DVD/DVR
DIGITAL
OUT
R L
IN
R L CENTER SUB WOOFER FRONT
AM LOOP
AM loop
antenna
FM wire
antenna
3/8 in.
(10mm)
One-touch
PAL-connector
75
Ω
coaxial cable
ANTENNA
FM
UNBAL
75 Ω
AM
LOOP
ANTENNA
FM
UNBAL
75 Ω
AM
LOOP
Outdoor
antenna
Loop antenna
Indoor antenna
(vinyl-coated wire)
15–18 ft.
(5–6 m)
SX-315.book 9 ページ ２００４年１１月８日 月曜日 午前１１時２分