Keys Fitness T240 - Manuel (Page 28)

28
Belt and Running Deck
Running Belt
The running belt supplied with each treadmill is of the highest quality, offering superior traction and low noise under
extreme conditions. It is therefore important to maintain each running belt periodically by observing that no cuts have
appeared over time, and that the running belt has not shifted to one side of the deck surface. If the running belt constantly
tracks (or moves) to one side of the deck, you must adjust the alignment bolts placed at the rear of the running belt.
See Belt Alignment for complete procedure.
Deck Surface
The running deck needs to remain free of any loose items
that may become trapped between the running belt and the
rollers. Avoid dropping liquids on the deck as this may cause
the impregnated wax to gum up and collect at the rollers.
Under extreme conditions resulting in heavy wear and tear
on the deck surface, it may be necessary to remove the deck
and turn it over, or turn it back-to-front to expose a fresh coat
of wax. The deck is specially designed to offer four reversible
sides that have new or reduced wax surface wear.
Please contact your Bodyguard ® Dealer for servicing the deck.
Make certain to have the power off before doing any
maintenance.
1 - Breaker
2 - ON/OFF switch
Drive motor with connection wires.
1 - Speed sensor cable
2 - Computer power cable
3 - Computer DATA cable
4 - Elevation motor cable
5 - Power AC cable
6 - Motor cable
2 1
1
2 3
4
5
6
figure 10
1
2 3
4
5
6
Motor in treadmill for American models
figure 11 figure 11
Motor in treadmill for International models