Keys Fitness T240 Manuel d'utilisation

Page 22

Advertising
background image

Troubleshooting Check List
Table 1

Possible Chest Strap Heart Rate Problems

All Bodyguard

®

machines are compatible with the Polar wireless heart rate system. This includes a chest strap and a

receiver. The receiver is an integral part of the machine and it is hidden inside. The chest strap is an option on all machines
and can be purchased from Bodyguard

®

Polar. If you are having some problems with the reception, please use the following

troubleshooting check list

.

The above table should help properly diagnose the problem. There is also misconceptions that the signal is immediate. The
chest strap electrodes need to be moistened in order to send a strong signal. Radio and neon light interferences can also
reduce the strength of the signal.

Access to “Diagnostics” menu

To determine the condition of the various electrical and mechanical components, you will need to enter into the
DIAGNOSTICS menu as follows:

1. Turn power OFF.

2. Simultaneously hold down the speed INCREASE and DECREASE keys and turn power ON.

3. Release the speed INCREASE and DECREASE keys once entered into the Diagnostics menu.

4. Press JustGo

®

/ENTER to access Diagnostic items.

22

C

Co

om

mp

pu

utte

er

r D

Diia

ag

gn

no

os

sttiic

cs

s

Computer Diagnostics

5

PROBLEM

• No signal.

• Weak signal.

• Erratic signal.

POSSIBLE CAUSE

• Dead battery in strap.

• Electrodes are not wet.

• Using wrong strap.

• Weak battery.

• Electrodes are not wet enough.

• Strap is not tight enough.

• Too much body fat.

• Chest size too small or too big.

• Receiver has a problem.

• Using wrong strap.

• Interference with other signals.

• Electrodes are not wet enough.

SOLUTION

• Change battery.

• Put water on electrodes.

• Use Polar.

• Change battery.

• Put water on electrodes.

• Put on tighter.

• No solution.

• Position strap accordingly.

• Verify signal in Diagnostics,

see Heart Rate Test section.

• Use Polar.

• Move the machine away from

potential interference sources.

• Put water on electrodes.

Advertising
Ce manuel est liée aux produits suivants: